迪朗奇 Delonghi Magnifica 咖啡機潤滑劑

Dow Corning Molykote 道康寧 111

康寧 Molykote摩力克DC111閥門潤滑劑和密封劑，應用－適用于控制閥和壓力截止閥、水質軟化器和龍頭閥門的潤滑；適用于真空和壓力系統的密封劑；適用于經常受沖淋和惡劣的環境影響的室外設備（也包括船上）的儀表、電器檢修入口及地下連接裝置的密封劑；化學性阻擋涂層；橡膠和塑料O型圈，墊圈和密封件。 Molykote摩力克DC111閥用潤滑劑和密封劑是一種高稠度的二甲基硅油復合物，可以抵抗多種有機和無機化學物質。
Molykote摩力克DC111閥用潤滑劑和密封劑可以用作橡膠與塑料O形圈、軟水器、旋塞閥、食用水閥桿、*行器真空系統、電子系統和點火線圈等許多產品的潤滑劑。　
Molykote摩力克DC111也可以在許多應用中用作密封劑，如真空和壓力系統、清洗設備、在嚴酷作業環境下工作的設備、電網電源進線和地下連接、變壓器墊片和設備外罩。
Molykote摩力克DC111閥用潤滑劑和密封劑可在-70°到400°F (-57°to 204°C)之間保持操作穩定性。　
Molykote摩力克DC111并已獲得NSF 51, NSF 61認證，可根據FDA 21 CFR 175.300條例，在某些情況下用作脫模劑。
Molykote摩力克DC111包裝：3.6kg/桶。150G/支

美國 潤奇 REACH 579 白色透明合成潤滑油脂

食品級 高溫潤滑油脂 耐高溫牛油 牛油 黃油 14oz
潤奇 579 白色透明合成潤滑油脂/食品級 ( USDA AA )
REACH 579 SYNTHETIC FOOD GRADE H-1 GREASE NLGI-2
白色透明，清潔無塵，外觀如水晶，又名水晶牛油。 高精密之儀表，量具儀器，醫療設備適合使用。 耐溫-40°F-550°F，合成性油脂使用壽命長。 USDA AA級 FDA 178.3620規範之油脂醫院飯店適用。 製罐、飲料、乳品、餅干、肉品…等，食品工廠適用。
每罐 14 OZ，每箱48 罐，35磅 / 桶，2 號油脂。

迪朗奇 Delonghi Magnifica ESAM 3500 零件料號

Delonghi 5313217751

Delonghi 5313217751

Delonghi 5332177500

Delonghi 5332177500

Delonghi 5332196000 (實際裝有點偏小...尺寸應該是6x2mm才對..下次再確認)

Delonghi 5332196000

Delonghi 5332149100
(下沖泡器&上沖泡器)

Delonghi 5332149100

Delonghi 5113211291
(水幫浦)

Delonghi 5113211291

迪朗奇 Delonghi Magnifica ESAM 3500 咖啡機 拆解相關影片

拆解上沖泡器(黃杯)

分解上沖泡器(黃杯)

更換下沖泡器O-Ring 和添加潤滑劑(食用黃油)

更換下沖泡器O-Ring 和添加潤滑劑(食用黃油)

拆解&加熱塊 part1 清潔

拆解加熱塊 part2 裝回

迪朗奇 Delonghi Magnifica ESAM 3500 咖啡機 內部路徑圖 (維修參考)

windows 8 key auto filled

How To Skip Product Key When Installing Windows 8

One of the things I quite miss the old way in Windows 7 is to skip the product key input during the installation. I believe there are reasons why Microsoft has put a stop sign on this but there are also valid situations where skipping a product key during the installation also makes sense.

Basically, you will need to extract the files from Windows 8 ISO file, add a file named ei.cfg insources folder, with the following content, and re-wrap up the ISO file. (click here to follow step-by-step how to modify ISO file)

[EditionID]
Core
[Channel]
Retail
[VL]
0

Edition ID can be Core, Professional, or Enterprise, depending on the ISO image file you have. And Channel can be Retail or OEM, while VL can be set to 1 for true or 0 for false.

But I found it will be a lot easier if you have created the bootable USB drive, since you can create and edit the ei.cfg file directly into the USB file system.

Once you have the media ready, you can boot off it to start the installation process again. All steps are the same, until you reach to the point where you put in the product key. Now, you will see there is a Skip button you used to see all the time back to Windows 7 time. Clicking that will lead you to finish up the installation without typing in a valid product key.

/updated on Aug. 11, 2014/

If you have a valid product key for the edition windows you are using, you can add it in thePID.txt file in the \source folder to skip the product key entry step all together.

[PID]
Value=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

You can reuse the product key in the product ID file for multiple installations. The product key in the product ID file is only used to install Windows. This key is not used to activate Windows.

當硬碟被密碼鎖住時

This problem is caused by the format in which the password was originally saved in the drive. 
You can resolve this on at least some Lenovo laptops if the bios has a "use passphrase" setting. 

When "User" or "User+Master" appears for HD password greyed out, the "use passphrase"
setting will also be greyed out, and whatever it is set to must be toggled. To toggle it, remove 
the drive from the laptop, and then go into the bios settings. Remove other bios related passwords
if they are set. Now, you will be able to toggle the "user passphrase" setting, so do so. 
Power down, re-insert the drive, go back into the bios, and you will now be able to set or remove 
the hard-drive password. 

迪朗奇 Delonghi ESAM 3500 咖啡機 - Latte & Cappuccino 一鍵製作比較

迪朗奇Delonghi ESAM3500 的奶泡壺有分兩種Latte / Cappuccino
但這其實很不方便，因為當要切換時就要把奶壺取下換頭
不若ESAM4500只要一個切換鈕就可以切換Latte / Cappuccino

另外就是用了這兩年多來，一直覺得兩個頭好像做出來的奶泡量一樣沒什麼差別..
但一直沒去實際比較，因為要換頭太麻煩了
這幾天也心血來潮，整個自己拆機做清理(已過保固了才敢拆)&做了一些測試
下面就是我用兩種奶泡壺做的Latte / Cappuccino的比較

磨豆器粗細設定：3
濃淡度設定：Extra Strong
比例有調過：奶泡45秒 & 咖啡萃取20秒

平常我都是用Latte的，卡布的頭蓋已經收起來好久沒用了
沒辦法用同一個杯子做比較是因為我怕卡布泡泡滿出來.....


Latte：

Latte

Cappuccino：

Cappuccino

結果比較：

左邊Cappuccino / 右邊Latte

Latte & Cappuccino 的差異就是Latte的奶量比Cappuccino多；Cappuccino的奶泡比Latte多

(我沒很專業，喜歡喝咖啡，只知道大概差異)

比較下來：

奶量：前面提過都是45秒奶泡，所以奶量應該沒差異吧…？

奶泡：奶泡量Cappuccino好像是多了一點點沒錯，就那麼一點點喔....

而在影片裡製作兩種的奶泡過程也好像差不多？以上照片&影片就給各位參考了

做完也才發現星巴克買的透明真空杯杯口竟然是歪的....Orz

粉餅照片：

粉餅

粉餅